10ton Traction Load Cell 5t Compression And Traction Load Cell
2.5ton
High accuracy S Type Compression And Traction Load Cell FSRG is
made based on strain gauge technology with unified 3.0mV/V output
intended for both tension and compression force measurement,
Traction And Compression Load Cell FSRG offers 25kg / 50kg / 100kg
/ 250kg / 500kg / 1 ton / 2.5ton / 5 ton / 7.5ton / 10 ton ten
rated capacities to choose from. High accuracy with maximum 0.02%
non-linearity of the full scale. Universal s-beam Traction Load
Cell FSRG is hermetically sealed to IP67 with both metric and
imperial threads available. S-beam Force Sensor FSRG is applicable
for rope and chain strength testing, bagging machines, material
testing machines, hanging scales, hoppers weighing applications.
You may find transducer FSRG interchangeable with Siemens SIWAREX
WL250 ST-S SA,VPG Revere 9363, Artech model SS 20210, Rice Lake
RL20000ST, ptglobal PT4000, Rice Lake RL20000SS, VPG Sensortronics
60050 with lower cost but uncompromised quality.
Load cell glossary:
Load Cell:A device which produces an output signal proportional to
the applied weight or force.
Wheatstone Bridge:A Wheatstone bridge is a network of four
resistive legs. One or more of these legs can be active sensing
elements. The Wheatstone bridge is the electrical equivalent of two
parallel voltage divider circuits. R1 and R2 compose one voltage
divider circuit, and R4 and R3 compose the second voltage divider
circuit. The output of a Wheatstone bridge is measured between the
middle nodes of the two voltage dividers.
Excitation: The voltage applied to the input terminals of the load
cell.
Rated Capacity: The maximum axial load the load cell is designed to
measure within its specifications.
Non-linearity: The maximum deviation of the calibration curve from
a straight line drawn between the no-load and rated outputs;
expressed as a percentage of the rated output and measured on
increasing load only.
Non-repeatability: The maximum difference between load cell output
readings for repeated loadings under identical loading and
environmental conditions.
Hysteresis: The maximum difference between load cell output
readings for the same applied load; one reading obtained by
increasing the load from zero and the other by decreasing the load
from rated output; usually measured at half rated output and
expressed in percent of rated output.
Creep: The change in load cell output occurring with specified
period of time, while under load, and with all environmental
conditions and other variables remaining constant; usually measured
with rated load applied.
Safe Overload: The maximum load in percent of rated capacity which
can be applied without producing a permanent shift in performance
characteristics beyond those specified.
Ultimate Overload: The maximum load in percent of rated capacity
which can be applied without producing a structural failure.
Operating Temperature: The extremes of temperature within which a
load cell will operate without permanent adverse change to any of
its performance characteristics.
Temperature Shift Span: The change in output due to a change in
load cell temperature; usually expressed as a percentage of load
per degree Celsius change in temperature.
Temperature Shift Zero: The change in zero balance due to a change
in ambient temperature; usually expressed in percent of rated
output per degree Celsius change in temperature.
Input Resistance: The resistance of the load cell bridge circuit
measured at the positive and negative excitation terminals with no
load applied and with the output terminals open-circuited.
Output Resistance: The resistance of the transducer bridge circuit
measured at the positive and negative signal terminals with no load
applied and with the input terminals open-circuited.
Specifications
| Capacity | 25kg 50kg 100kg 250kg 500kg 1ton 2.5ton 5ton 7.5ton 10ton |
| Rated output | 3.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.03mV/V |
| Nonlinearity | ±0.02% R.O. |
| Hysteresis | ±0.02% R.O. |
| Nonrepeatability | ±0.01% R.O. |
| Creep(30min) | ±0.02% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 250% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -35...+65oC |
| Temperature shift zero | ±0.02% R.O./10oC |
| Temperature shift span | ±0.02% R.O./10oC |
| Input resistance | 430±60 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP67 |
| Material of element | Stainless steel |
| Cable | Ø5*6000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation-
Green---Signal+ White--Signal- |
Click here to download
datasheet
