Flange Type Press Force Transducer 20N 50N 100N 200N 500N 1KN
Compression Force Measurement
Miniature Press Force Transducer FFG is made of stainless steel
utilizing strain gauge technology to deliver maximum 0.1%
non-linearity of rated output. Miniature Press Force Sensor FFG
offers 0-20N / 0-50N / 0-100N / 0-200N / 0-500N / 0-1kN / 0-2kN
seven rated capacities to choose from, Press Force Transducer FFG
can be used for both tension and compression force measurement.
Stainless steel construction, flange design, compact size,
bidirectional force measurement, high accuracy, Miniature Press
Load Cell FFG offers a perfect mixture for applications such as
wire tension control, force distribution analysis, automated
control, cylinder thrust measurement, assembly force monitoring, spring testing, ultrasonic welding clamp
force control, hand press force verification,and so on. In addition
to the standard specifications, Forsentek is also capable of and
willing to provide custom design service to meet requirements of
different applications.
| Ordering code | Measurement Range | Force direction |
| FFG-20N | 0-20N / 0-2kgf | Tension/compression |
| FFG-50N | 0-50N / 0-5kgf |
| FFG-100N | 0-100N / 0-10kgf |
| FFG-200N | 0-200N / 0-20kgf |
| FFG-500N | 0-500N / 0-50kgf |
| FFG-1kN | 0-1000N / 0-100kgf |
| FFG-2kN | 0-2000N / 0-200kgf |
Specifications
| Capacity | 20N / 50N / 100N / 200N / 500N / 1kN / 2kN
2kg / 5kg / 10kg / 20kg / 50kg / 100kg / 200kg
4.4lb / 10lb / 20lb / 45lb / 110lb / 220lbs / 450lbf |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 350±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of flange type press force sensor FFG is around
2.0mV/V.
Power supply of miniature press force transducer FFG is normally
within 3-15V.
Load / Capacity is within 0-1.
So the output range of flange mounted press force transducer FFG is
normally within -30mV...+30mV for tension and compression force
measurement.
Example one: Press Force Sensor FFG-500N with 2.0mV/V sensitivity powered by 5V DC,the output
range is -10mV...+10mV(Tension and compression).
Example two: Tension And Compression Load Cell FFG-200N with
2.0mV/V sensitivity powered by 10V DC,the output range is
-20mV...+20mV(Tension and compression).
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example: Press Force Load Cell FFG-500N working with -5-5V
amplifier,the Force-Voltage relationship will be 0-500N compression
load VS 0-5V output, 0-500N tension load VS 0-(-5V) output,when you
get 3V output,it means the current load is 300N compression
force,when you get -2V output,it means the current load is 200N
tension force,and so on.
Flange Type Press Force Transducer 20N 50N 100N 200N 500N 1KN
Compression Force Measurement
Click here to download
datasheet
