Pancake Load Cell 50lb 110lb 220lb 440lb Compression Force
Measurement Transducer
M16 threaded Pancake Load Cell FCMA is made of high stiffness alloy
steel based on foil strain gauge technology to deliver 2.0mV/V
rated output proportional to the applied force.Pancake load cell
FCMA offers 0-66lb / 0-110lb / 0-220lb / 0-440lb / 0-660lb / 0-1100lb /
0-2200lb seven rated measuring ranges with maximum 0.1%
non-linearity of the rated output to choose from intended for both
static and dynamic force measurement, universal load cell FCMA can
be used for both tension and compression measurement, low profile structure makes it also suitable for in-line force
monitoring. Weight Sensor FCMA is designed with a M16x1.5 threaded
hole running through the center of the transducer which can be used
to mount attachments such as load buttons,eye bolts or other
adapters for force loading, this makes spoke type load cells very
adaptable to various cases, you may find pancake type load cell
FCMA applicable for force measurement in injection-molding
machines, press machines and material testing equipment, weight
measurement for tanks, vessels and hoppers, and so on.
Specifications
| Capacity | 30kg / 300N / 66lbf 50kg / 500N / 110 lbf 100kg / 1kN / 220 lb 200kg / 2kN / 440lb 300kg / 3kN / 660 lbf 500kg / 5kN / 1.1klb 1000kg / 10kN / 2.2klbf |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% of capacity |
| Hysteresis | ±0.1% of capacity |
| Nonrepeatability | ±0.05% of capacity |
| Creep(5min) | ±0.05% of capacity |
| Safe overload | 150% of capacity |
| Ultimate overload | 200% of capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 750±50 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Alloy steel |
| Cable | Ø5*2000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Pancake Load Cell 50lb 110lb 220lb 440lb Compression Force
Measurement Transducer
Brief instruction of Rated output(or Sensitivity):
Definition: The signal produced by load cell(or force transducer)
when rated load is applied, expressed in terms of mV/V. The rated
output indicates the output signal range of a sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output is pancake load cell FCMA is normally around 2.0mV/V.
Power supply of low profile load cell FCMA is normally within
3-15V.
Load / Capacity is within 0-1.
So the output range of universal load cell FCMA is normaly within
-30mV...+30mV for tension and compression force measurement.
Example one: Pancake Load Cell FCMA-100kg with 2.0mV/V power by
3.3V DC,the output range is -6.6mV...+6.6mV proportional to the
applied load.
Example two: Universal Load Cell FCMA-300kg with 1.9mV/V power by
10V DC,the output range is -19mV...+19mV proportional to the
applied load.
Load cell + Signal amplifier:
Load cell normally outputs -30mV...+30mV which sometimes cannot be
recognized by signal processing units directly,so signal
conditioner is introduced to convert mV signal into
0-5V/0-10V/4-20mA for easy signal processing.
Example: Compression load cell sensor FCMA-200kg working with 0-10V
amplifier,the load-output relationship will be 0-200kg load VS
0-10V output,when you get 5V output,it means the current load on
the loadcell is 100kg.
Click here to download
datasheet
