Flange Mounted Compression Load Cell 50kg Cylindrical Compression
Type Load Cell 100kg
Flange-to-Flange Compression Load Cell FFA is made of stainless
steel utilizing strain gauge technology to deliver mV/V output with
maximum 0.1% non-linearity of the full scale.Tension Compression
Force Sensor FFA offers 0-20kg / 0-50kg / 0-100kg / 0-200kg /
0-500kg / 0-1000kg / 0-2000kg seven rated measuring ranges to
choose from, flange type force transducer FFA can be used for both
tension and compression force measurement. Stainless steel
construction, flange design, compact size, bidirectional force
measurement, high accuracy, Cylindrical Load Cell FFA offers a perfect force measuring solution for
applications such as wire tension control, force distribution
analysis, automated control, cylinder thrust measurement, assembly
force monitoring, spring testing, ultrasonic welding clamp force
control, hand press force verification,and so on. In addition to
the standard specifications, Forsentek is also capable of and
willing to provide custom design service to meet requirements of
different applications.
Dimensions(Unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FFA-200N | 0-200N / 0-20kg | Tension/compression |
| FFA-500N | 0-500N / 0-50kg |
| FFA-1kN | 0-1000N / 0-100kg |
| FFA-2kN | 0-2000N / 0-200kg |
| FFA-5kN | 0-5000N / 0-500kg |
| FFA-10kN | 0-10kN / 0-1000kg |
| FFA-20kN | 0-20kN / 0-2000kg |
Specifications
| Capacity | 200N / 20kg / 44 lbf
500N / 50kg / 110 lb
1000N / 100kg / 220 lbf 2000N / 200kg / 440 lb
5000N / 500kg / 1.1 klb
10kN / 1000kg / 2.2 klb 20kN / 2000kg / 4.4 klb |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% of full capacity |
| Hysteresis | ±0.1% of full capacity |
| Nonrepeatability | ±0.05% of full capacity |
| Creep(5min) | ±0.05% of full capacity |
| Safe overload | 150% of full capacity |
| Ultimate overload | 200% of full capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 385±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
The output signal from the wheatstone bridge is normally within
-30mV...+30mV. A load cell amplifier can be used to deliver -5~5V,
0-10V or 4-20mA output. Example: Cylindrical compression load cell FFA-100kg working with
-10-10V amplifier,the Force-Voltage relationship will be 0-100kg
compression load VS 0-10V output, 0-100kg tension load VS 0-(-10V)
output which is linear. When you get 5V output,it means the current
load is 50kg compression force,when you get -3V output,it means the
current load is 30kg tension load,and so on.
Flange Mounted Compression Load Cell 100kg Cylindrical Compression
Type Load Cell 50kg
Click here to download
datasheet
