Mini Button Load Cell 10lb 20lb 50lb 100lb Miniature Button Type
Load Cell
Miniature Button Load Cell FC8E is made of stainless steel based on
metal foil stain gauge technology intended for compression force
measurement. 1000 ohms high resistance strain gauge delivers better
stability compared to commonly used 350ohms gauges, miniature load
cell FC8E offers 0-11lb / 0-22lb / 0-45lb / 0-110lb four measuring
ranges to choose from.Smallest button load cell FC8E is featured
with only 8mm outer diameter and 6mm total height which makes it
extremely suitable for force measurement applications with limited
mounting space.Typical applications for Micro Compression Sensor
FC8E are such as clamping force measuremen, force overload
protection, load distribution analysis, pressing die force
measurement, auto equipment, assembly line and so on.
Dimensions(unit in milimeter)
| Ordering code | Measurement Range | Force direction |
| FC8E-50N | 0-50N / 0-11 lb | Compression |
| FC8E-100N | 0-100N / 0-22 lb |
| FC8E-200N | 0-200N / 0-45 lb |
| FC8E-500N | 0-500N / 0-110 lb |
Specifications
| Capacity | 50N / 5kg / 11lb 100N / 10kg / 22lb 200N / 20kg / 45lb 500N / 50kg / 110lb |
| Rated output | 1.0 mV/V |
| Excitation | 3-8V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±1% of capacity |
| Hysteresis | ±1% of capacity |
| Nonrepeatability | ±0.5% of capacity |
| Creep(5min) | ±0.2% of capacity |
| Safe overload | 150% of capacity |
| Ultimate overload | 200% of capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 900±100 ohms |
| Output resistance | 900±100 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø2*4000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Cell is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gauge deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell which is normally within 0...+10mV for model FC8E. A
signal conditioner can be used to convert mV signal into 0-5V /
0-10V / 4-20mA output, taking FC8E-200N working with amplifier
FSC(0-10V)-24V for example, the force-voltage relationship will be
0-200N compression load VS 0-10V voltage, 1V corresponds to 20N
load, 2V voltage corresponds to 40N force,and so on.
Mini Button Load Cell 10 lb 20 lb 50 lb 100 lb Miniature Button
Type Load Cell
Click here to download
datasheet
