Micro Button Load Cell 10lb 20 lb 40lb 100 lb Smallest Compression
Force Transducer
Smallest Compression Load Cell FC8E is made of stainless steel based on metal foil stain gauge
technology intended for compression force measurement. 1000 ohms
high resistance strain gauge delivers better stability compared to
commonly used 350ohms gauges, miniature load cell FC8E offers
0-11lb / 0-22lb / 0-44lb / 0-110lb four measuring ranges to choose
from.Smallest button load cell FC8E is featured with only 8mm outer
diameter and 6mm total height which makes it extremely suitable for
force measurement applications with limited mounting space.Typical
applications for Micro Compression Sensor FC8E are such as clamping
force measuremen, force overload protection, load distribution
analysis, pressing die force measurement, auto equipment, assembly
line and so on.
Dimensions(unit in milimeter)
| Ordering code | Measurement Range | Force direction |
| FC8E-50N | 0-50N / 0-11 lbf | Compression |
| FC8E-100N | 0-100N / 0-22 lbf |
| FC8E-200N | 0-200N / 0-44 lbf |
| FC8E-500N | 0-500N / 0-110 lbf |
Specifications
| Capacity | 50N / 5kg / 11 lb 100N / 10kg / 22 lbf 200N / 20kg / 44lbf 500N / 50kg / 110lb |
| Rated output | 1.0 mV/V |
| Excitation | 3-8V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±1% R.O. |
| Hysteresis | ±1% R.O. |
| Nonrepeatability | ±0.5% R.O. |
| Creep(5min) | ±0.2% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 900±100 ohms |
| Output resistance | 900±100 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø2*4000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Cell is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gauge deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell which is normally within 0...+10mV for model FC8E. A
signal conditioner can be used to convert mV signal into 0-5V /
0-10V / 4-20mA output, taking FC8E-500N working with amplifier
FSC(0-5V)-24V for example, the force-voltage relationship will be
0-500N load VS 0-5V voltage, 1V corresponds to 100N load, 2V
voltage corresponds to 200N force,and so on.
Miniature Compression Force Transducer 10lb 20 lb 40lb 100 lb
Smallest Compression Force Sensor
Click here to download
datasheet
