Flange Mounted Compression Force Transducer 20kN 10kN 5kN 2kN 1kN
500N 200N
Flange-to-Flange Type Compression Load Cell FFA is made of stainless steel utilizing strain gauge technology
to deliver mV/V output with maximum 0.1% non-linearity of the full
scale.Tension Compression Force Sensor FFA offers 0-200N / 0-500N /
0-1kN / 0-2kN / 0-5kN / 0-10kN / 0-20kN seven measuring ranges to choose from, transducer FFA can be used
for both tension and compression force measurement. Stainless steel
construction, flange design, compact size, bidirectional force
measurement, high accuracy, Flange Load Cell FFA offers a perfect force measuring solution for applications
such as wire tension control, force distribution analysis,
automated control, cylinder thrust measurement, assembly force monitoring, spring testing, ultrasonic welding clamp
force control, hand press force verification,and so on. In addition
to the standard specifications, Forsentek is also capable of and
willing to provide custom design service to meet requirements of
different applications.
Dimensions(Unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FFA-200N | 0-200N / 0-20kgf | Tension/compression |
| FFA-500N | 0-500N / 0-50kgf |
| FFA-1kN | 0-1000N / 0-100kgf |
| FFA-2kN | 0-2000N / 0-200kgf |
| FFA-5kN | 0-5000N / 0-500kgf |
| FFA-10kN | 0-10kN / 0-1000kg |
| FFA-20kN | 0-20kN / 0-2000kg |
Specifications
| Capacity | 200N / 20kg / 45 lbf
500N / 50kg / 112lb
1000N / 100kg / 225 lbf 2000N / 200kg / 450lb
5000N / 500kg / 1.12klbf
10kN / 1000kg / 2.25k lb 20kN / 2000kg / 4.5klb |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 400±50 ohms |
| Output resistance | 400±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
The output signal from the wheatstone bridge is normally within
-30mV...+30mV. A load cell amplifier can be used to deliver -5~5V,
0-10V or 4-20mA output.
Example: FFA-10kN working with -10-10V amplifier,the Force-Voltage
relationship will be 0-10kN compression load VS 0-10V output,
0-10kN tension load VS 0-(-10V) output,when you get 5V output,it
means the current load is 5kN compression force,when you get -3V
output,it means the current load is 3kN tension force,and so on.
Flange Mounted Compression Force Load Cell 20kN 10kN 5kN 2kN 1kN
500N 200N
Click here to download
datasheet
