Flange-to-Flange Force Transducer 60kN 50kN 40kN 30kN 20kN 10kN 5kN
3kN 2kN
Flange Type Tension And Compression Load Cell FFE is made of
stainless steel utilizing strain gauge technology to deliver
maximum 0.3% non-linearity of full scale. Tension Compression Force Sensor FFE offers 0-2kN / 0-3kN / 0-5kN / 0-10kN / 0-20kN / 0-30kN /
0-40kN / 0-50kN / 0-60kN nine rated measuring ranges to choose from, Flange Load Cell FFE can be used for both tension and compression force
measurement. Stainless steel construction, flange design, compact
size, bidirectional force measurement, Flange Force Transducer FFE
offers a perfect force measuring solution for applications such as
wire tension control, force distribution analysis, automated
control, cylinder thrust measurement, assembly force monitoring,
spring testing, ultrasonic welding clamp force control, hand press
force verification,and so on. In addition to the standard
specifications, Forsentek is also capable of and willing to provide
custom made service to meet requirements of different applications.
Dimensions(Unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FFE-2kN | 0-2000N / 0-200kg | Tension/compression |
| FFE-3kN | 0-3000N / 0-300kg |
| FFE-5kN | 0-5000N / 0-500kg |
| FFE-10kN | 0-10kN / 0-1000kg |
| FFE-20kN | 0-20kN / 0-2000kg |
| FFE-30kN | 0-30kN / 0-3000kg |
| FFE-40kN | 0-40kN / 0-4000kg |
| FFE-50kN | 0-50kN / 0-5000kg |
| FFE-60kN | 0-60kN / 0-6000kg |
Specifications
| Capacity | 2kN / 200kg / 440lb
3kN / 300kg / 660lb
5kN / 500kg / 1.1klb 10kN / 1000kg / 2.2klb
20kN / 2000kg / 4.4klb
30kN / 3000kg / 6.6klb 40kN / 4000kg / 8.8klb 50kN / 5000kg / 11klb 60kN / 6000kg / 13.2klb |
| Rated output | 1.5 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 750±100 ohms |
| Output resistance | 702±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm 4-core shielded |
| Wiring code | Compression@ Red--Exc+ Black--Exc- Green--Sig+ White--Sig- |
The output signal of model FFE is normally within -25mV...+25mV. A
load cell amplifier can be used to convert mV singal into -5~5V,
0-10V or 4-20mA output.
Example: Compression Force Transducer FFE-50kN working with amplifier FSC(0-5V)-24V,the Force-Voltage
relationship will be 0-50kN compression load VS 0-5V output, 1V voltage corresponds to 10kN compression load, 3V voltage
corresponds to 30kN compression force,and so on.
Flange Type Load Cell 60kN 50kN 40kN 30kN 20kN 10kN 5kN 3kN 2kN
Force Sensor
Click here to download
datasheet
