Flange Style Force Sensor 20kN 10kN 5kN 3kN 2kN Tension Compression
Transducer
Flange to Flange Tension Compression Sensor FFD is made of stainless steel utilizing strain gauge technology
to deliver maximum 0.2% non-linearity of full scale. Flange Type
Force Sensor FFD offers 0-2kN / 0-3kN / 0-5kN / 0-10kN / 0-20kN five rated measuring ranges to choose from, Flange Force Transducer FFD can be used for both tension and compression force
measurement. Stainless steel construction, flange design, compact
size, bidirectional force measurement, Flange Force Transducer FFD
offers a perfect force measuring solution for applications such as
force distribution analysis, automated control, cylinder thrust
measurement, assembly force monitoring, spring testing, ultrasonic
welding clamp force control, hand press force verification, and so
on. In addition to the standard specifications, Forsentek is also
capable of and willing to provide custom made service to meet
requirements of different applications.
Dimensions(Unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FFD-2kN | 0-2000N / 0-200kg | Tension/compression |
| FFD-3kN | 0-3000N / 0-300kg |
| FFD-5kN | 0-5000N / 0-500kg |
| FFD-10kN | 0-10kN / 0-1000kg |
| FFD-20kN | 0-20kN / 0-2000kg |
Specifications
| Capacity | 2kN / 200kg / 440lb
3kN / 300kg / 660 lb
5kN / 500kg / 1.1klb 10kN / 1000kg / 2.2klb
20kN / 2000kg / 4.4klb |
| Rated output | 1.5 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 750±100 ohms |
| Output resistance | 702±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm 4-core shielded |
| Wiring code | Compression@ Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
The output signal of model FFD is normally within -25mV...+25mV. A
load cell amplifier can be used to convert mV singal into -5~5V,
0-10V or 4-20mA output.
Example: Compression Force Sensor FFD-20kN working with amplifier FSC(0-10V)-24V, the Force-Voltage
relationship will be 0-20kN compression load VS 0-10V output, 1V voltage corresponds to 2kN compression load, 5V voltage
corresponds to 10kN compression force,and so on.
Flange Style Load Cell 20kN 10kN 5kN 3kN 2kN Tension Compression
Sensor
Click here to download
datasheet
