Small Multi-axis Sensor 100kg 50kg Tri-axial Load Cell 20kg 10kg
Miniature Multi-axis Load Cell F3N is designed to measure both
tension and compression load in Fx/Fy/Fz axis. Three independent
wheatstone bridges are bonded on corresponding beams to deliver mV
output proportional to the applied force, 0-5V / 0-10V / 4-20mA
output is available through multi-channel amplifier LC3A. Small
size Multi-axis Force Sensor F3N offers 5kgf / 10kgf / 20kgf /
50kgf / 100kgf five rated capacities for all 3 axes. Miniature
triaxial load cell F3N utilizes 1000 ohms high resistance bridge,
this makes it consume less power and suitable for battery powered
measuring systems. Typical applications for multi-axis sensor F3N
are for example friction force measurement, force simulation in
medical rehabilitation equipment, force feedback in robotics, force
monitoring in handing devices, mechanical anti-collision, and so
on.
Ordering code of tri-axial force sensor F3N
Ordering code | Capacity | Material |
| Fx=Fy=Fz |
| F3N-50N | 50N | Aluminum alloy |
| F3N-100N-A | 100N |
| F3N-200N-A | 200N |
| F3N-100N-S | 100N | Stainless steel |
| F3N-200N-S | 200N |
| F3N-500N | 500N |
| F3N-1kN | 1000N |
Specifications
| Rated Capacity | 50N / 5kgf / 11 lb 100N / 10kgf / 22lb 200N / 20kgf / 45 lb 500N / 50kgf / 112lb 1000N / 100kgf / 225lb |
| Sensitivity | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.3% of the capacity |
| Hysteresis | ±0.3% of the capacity |
| Non-repeatability | ±0.1% of the capacity |
| Creep(3min) | ±0.2% of the capacity |
| Safe overload | 150% of the capacity |
| Ultimate overload | 200% of the capacity |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy or Stainless steel |
| Cable | Ø5*3000mm 12-wire shielded cable |
| Wiring code | 4-wire connection for each axis |
Small Size Multi-axis Load Cell 100kg 50kg Triaxial Force Sensor
20kg 10kg
3-axis force load cell F3N measures forces simultaneously in 3
mutually perpendicular axes: X, Y, and Z – tension and compression.
Each axis provides a full bridge output proportional to the applied
force and requires no mathematical manipulation. The acting force
causes deformation of the elastomer, the bonded strain gauge
deforms accordingly which will cause the resistance change of the
wheatstone bridge, under constant power supply, the output signal
between Sig+ and Sig- will change proportionally, thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of triaxial force sensor F3N is around 1.0mV/V.
Power supply of 3-axis load cell F3N is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Multi-axis Force Sensor F3N is normally
within -15mV...+15mV for bidirectional force measurement in each
axis.
Example: Multi axis load
cell F3N-500N with 1.0mV/V sensitivity powered by 10V DC, the output
range is -10mV...+10mV.
A multi-channel signal conditioner can be used with 3D transducer
F3N to deliver -5~5V, 0-10V or 4-20mA output.
Example: 3-axis force sensor F3N-1kN working with LC3A(-10-10V)-24V
amplifier, the Force-Voltage relationship in each axis will be
0-1kN load in Fx+/Fy+/Fz+ direction VS 0-10V output, 0-1kN load in
Fx-/Fy-/Fz- direction VS 0-(-10V) output, which is linear
regardless of the measurement error.
Small Multi-axis Load Cell 10kg 20kg Triaxial Loadcell 50kg 100kg
Click here to download
datasheet
